700/800 Series - High Torque Top Entering Mixer

Product Type(s) : Top Entry Mixers
Industries : Chemical

Description :

Lightnin 700/800 Mixers are designed to provide reliable service in the largest, most demanding applications, from pharmaceutical fermentation and large-scale chemical processing to minerals processing and heavy sludge waste treatment. 听听

Capacity :

Aftermarket Services

WHERE TO BUY

PRODUCT FEATURES AND BENEFITS

Exclusive hollow quill drive protects the gear train from severe shaft flexure.
Bearings are sized far beyond AGMA requirements for minimum maintenance and long service life
Heavy-duty motor mount is standard
Horsepowers from 25 to 3000 + and speeds from 230 to 11.4 rpm
Choice of replaceable cartridge seals
Largest output shaft per allowable torque for greater bending design & longer shafts.
Case carburized & ground helical-bevel combination gearing for unmatched efficiency, quiet running & long life

Full Spectrum of Impellers to Optimize Results: Included are the A310 for flow-controlled applications, the A320 for high-viscosity requirements, the A315 for handling gas alone or gas and solids together, as well as the A6000 for applications requiring the special benefits of composite construction.听听 Guaranteed Performance: Together, we design your rugged 700/800 mixer, selecting impeller type, shaft length and other specifications to optimize process results. Then, we guarantee your Lightnin Mixer to perform the job for which it is recommended. Tested 100%: Every large Lightnin mixer drive is tested under load on an advanced dynamometer. Test check gear contact patterns, noise readings, thermal data and lubrication. We welcome you to watch us test your mixer. Our goal always: Deliver factory-assembled, ready-to-go packaged units with interchangeable parts that will provide you the most efficient performance at the best possible cost. New design for 784/884 Mixers

Positive direct drive
Rugged housing designed for easy assembly and maintenance
Tapered roller bearings handle overhung shaft loads
Triple reduction gearing has robust AGMA service factor
Available on larger units to 1250 hp

Features available on units up to 1000kW (1250HP) Flex ProtectionGears in all 800 series units like this one are protected from mixer shaft bending loads by the Lightnin hollow quill flex protection. Quill and shaft mixer are mounted on separate bearings. A torsionally resilient coupling transmits power from quill to mixer shaft, while isolating gearing from shaft flex. Splash LubricationOn sizes up to 783/883, gears dipping in an oil sump provide a constant flow of oil to all surfaces. Covered For SafetyPersonnel are protected from rotating parts by guards that meet OSHA requirements.All mounting flanges are designed to ASME Unfired Pressure Vessel Code. Rugged Motor MountA heavy-duty channel base is the standard motor mount for Series 700/800. Oil DamLeakage down the mixer shaft is positively prevented by an oil dam around the quill shaft. Quiet-Running GearsAll helical gears are carburized and ground. The highly efficient spiral bevel gear and pinion are match-lapped as a set to assure smooth, quiet operation. 听听

Options
Performance

HIGH-EFFICIENCY IMPELLERS TO MATCH YOUR PROCESS NEEDS:

A510: General Purpose
New laser-designed impeller delivers true axial flow, high flow-per-horsepower, and can be custom-fit to your application.

A315: Gas-Liquids-Solids
Improves yield by up to 50% in shear-sensitive processes such as fermentation. The A315 is the optimum impeller for applications involving mass transfer and solids suspension.

A320: High-Viscosity
Fluid foil design reduces blend time by half and delivers better axial motion for 50% power saving compared to conventional pitch-blade turbines.

A6000: Low Viscosity
For flow-controlled applications in hostile environments. Maintains flow and reduces power to 45% of conventional pitched-blade impellers. Structural composite is lightweight and-extremely resistant to corrosion.

尝颈驳丑迟苍颈苍尝耻产别鈩�
As part of our commitment to our Customers and their operations, 免费吃瓜 has introduced 尝颈驳丑迟苍颈苍尝耻产别鈩�, a range of gear oil for our Lightnin Mixers. It is available to order withyour new equipment or as a maintenance item throughout the life of your equipment. LightninLube is manufactured to AGMA Standard 8005-D94. Our synthetic oils are designed to give you a wide operating range and are available in ISO 100, ISO 150, ISO220 and ISO 320 grades. Contact our Service department or your Sales Representative to discuss your needs.

听

The Biggest, Heaviest Duty Standard Drives Made Specifically for Mixing

免费吃瓜