Universal 2 Series - Bio-Pharmaceutical - Positive Displacement Pumps

Product Type(s) : Positive Displacement Pumps
Industries : Pharmaceutical

Description :

Universal 2 Bio-Pharmaceutical positive displacement pumps are designed for pharmaceutical and biotech processes.

Capacity :

Pump Services

WHERE TO BUY

With advanced features of the Universal 2 PD pump, the Universal 2 Bio-Pharmaceutical is designed for the special requirements of pharmaceutical and biotech processes.

316L stainless steel rotors standard; non-galling Waukesha "88" alloy rotors optional
316L stainless steel product contact surfaces standard; 316L stainless steel or electropolish of all product contact surfaces optional
Stainless steel bearing frame
Additional option: seal flush
Maximum pressure: 200-300 psi (13.8-20.7 bar), depending on model
Maximum temperature: -40掳F (-40掳C) to 300掳F (149掳C)

Theory of Operation

Time-tested Waukesha Cherry-Burrell庐 rotary pump; circumferential-piston operating principle

In the Waukesha Cherry-Burrell design, arc-shaped "pistons鈥� (rotor wings) travel in annular-shaped cylinders machined in the pump body; the resulting long sealing path reduces slippage and produces a smooth flow of product without destructive pulses or pressure peaks and without valves or complex parts.

听

FOR LOW VISCOSITY FLUIDS

Rotors, made of Waukesha 鈥�88鈥� alloy, can be run with close clearance to the 316L stainless steel fluid head, without galling or seizing should inadvertent pressure surges cause contact. The close clearances combined with the rotor geometry, which gives a long sealing path between the pump inlet and outlet, means low slip operation. As a result, you achieve: high efficiency, good priming ability, metering capability and good flow control.

听

FOR HIGH VISCOSITY FLUIDS

The large fluid cavities of the rotors ... plus the large, easy entry anti-cavitation ports, allow efficient pumping of high viscosity fluids, slurries or even liquids with large chunks or
particles.

听

FOR NON-LUBRICATING AND ABRASIVE FLUIDS

The Waukesha Cherry-Burrell design has no bearings in the fluid being pumped, no sliding or rolling contact and no rotor-to-rotor contact. This produces EXCELLENT听SERVICE LIFE even under severe operating conditions.

Key Applications

Pharmaceutical/Cosmetics

Pill Pastes
Syrups, Extracts, Slurries
Face Creams & Lotions
Hair Styling Gels & Liquids
Dyes & Alcohols

Dimensions
Specifications

MODEL 006-U2

0-1000 RPM speed range. 1" (25.4 mm) and 1陆" (38.1 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	4.75	8.3	3.75	11.71	13.92	14.92	5.50	1.94	2.31	.41slot	7.66	2.93	9.61	4.21	.875	3.49	6.97
MM	121	211	95	297	354	379	140	49	59	10 slot	194	74	244	107	22.23	89	177

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U2 to 030-U2, 1"-11- NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 56 lb. (25.4 kg.).

NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.听 Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

Pump Curve 95-07075 - Model 006-U2 || PDF

Model 006 Universal 2 SOLIDWORKS 3D || ZIP

Model 006 Universal 2 STEP 3D || ZIP

MODEL 015-U2

0-1000 RPM speed range. 1陆" (38.1 mm) port sizes available; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	4.75	8.3	3.75	11.71	13.92	14.92	5.50	1.94	2.31	.41slot	7.66	2.93	9.61	4.21	.875	3.49	6.97
MM	121	211	95	297	354	379	140	49	59	10 slot	194	74	244	107	22.23	89	177

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 56 lb. (25.4 kg.).

Pump Curve 95-07076 - Model 015-U2 || PDF

Model 015 Universal 2 SOLIDWORKS 3D || ZIP

Model 015 Universal 2STEP 3D || ZIP

MODEL 018-U2

0-700 RPM speed range. 1陆" (38.1 mm) and 2" (50.8 mm) port sizes available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	4.75	8.3	3.75	12.37	14.59	15.58	5.50	1.94	2.31	.41slot	7.66	2.93	9.84	4.21	.875	3.49	6.97
MM	121	211	95	314	371	396	140	49	59	10 slot	194	74	250	107	22.23	89	177

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 65 lb. (29.5 kg.).

Pump Curve 95-07077 - Model 018-U2 || PDF

Model 018 Universal 2 SOLIDWORKS 3D ||听ZIP

Model 018 Universal 2 STEP 3D || ZIP

MODEL 030-U2

0-600 RPM speed range. 1陆" (38.1 mm) and 2" (50.8 mm) port sizes available; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	6.25	10.29	4.25	14.49	16.49	17.58	6.86	2.31	2.56	.41slot	8.83	3.56	11.61	5.21	1.25	4.25	8.5
MM	159	261	108	368	419	447	174	59	65	10 slot	224	90	295	132	31.75	108	216

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 130 lb. (59.0 kg.).

Pump Curve 95-07078 - Model 030-U2 || PDF

Model 030 Universal 2 SOLIDWORKS 3D || ZIP

Model 030 Universal 2 STEP 3D || ZIP

MODEL 040-U2

0-600 RPM speed range. 2" (50.8 mm) port size available; suitable to 150 PSI (10 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	6.25	10.29	4.25	14.87	16.87	17.96	6.86	2.31	2.56	.41slot	8.83	3.56	11.99	5.21	1.25	4.31	8.62
MM	159	261	108	378	428	456	174	59	65	10 slot	224	90	305	132	31.75	109	219

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 140 lb. (64.0 kg.).

Pump Curve 95-07241 - Model 040-U2 || PDF

Model 040 Universal 2 SOLIDWORKS 3D || ZIP

Model 040 Universal 2 STEP 3D || ZIP

MODEL 060-U2

0-600 RPM speed range. 2陆" (63.5 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	8.25	15.31	5.87	19.14	21.25	22.83	9.56	3.50	4.12	.53	10.99	5.06	15.14	7.31	1.625	5.37	10.75
MM	210	389	149	486	540	580	243	89	105	13	279	129	385	186	41.28	136	273

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U2 to 030-U2, 1"-11- NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 285 lb. (129.3 kg.).

Pump Curve 95-07079 - Model 060-U2 || PDF

Model 060 Universal 2 SOLIDWORKS 3D || ZIP

Model 060 Universal 2 STEP 3D || ZIP

MODEL 130-U2

0-600 RPM speed range. 3" (76.2 mm) port sizes available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	8.25	15.31	5.87	20.15	22.27	23.84	9.56	3.50	4.12	.53	10.99	5.06	15.77	7.31	1.625	5.37	10.75
MM	210	389	149	512	566	606	243	89	105	13	279	129	401	186	41.28	136	273

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 305 lb. (138.3 kg.).

Pump Curve 95-07080 - Model 130-U2 || PDF

Model 130 Universal 2 SOLIDWORKS 3D || ZIP

Model 130 Universal 2 STEP 3D || ZIP

MODEL 180-U2

0-600 RPM speed range. 3" (76.2 mm) port sizes available; suitable to 450 PSI (31.0 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	8.50	19.13	9.00	23.26	25.32	28.51	12.38	3.75	7.25	.53 slot	14.80	6.38	18.25	9.38	2.0	6.53	13.06
MM	216	486	2.29	591	643	724	314	95	184	13 slot	376	162	464	238	50.8	168	337

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 520 lb. (236.0 kg.).

Pump Curve 95-07107 - Model 180-U2 || PDF

Model 180 Universal 2 SOLIDWORKS 3D || ZIP

Model 180 Universal 2 STEP 3D || ZIP

MODEL 210-U2

0-600 RPM speed range. 4" (101.6 mm) port sizes available; suitable to 500 PSI (34.5 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	12.00	22.38	11.63	27.08	28.58	--	13.88	5.25	8.00	.66	17.80	6.88	21.24	10.38	2.375	7.37	14.73
MM	305	568	295	688	726	--	353	133	203	17	452	175	539	264	60.45	187	374

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 915 lb. (415.0 kg.).

Pump Curve 95-07156 - Model 210-U2 || PDF

Model 210 Universal 2 SOLIDWORKS 3D || ZIP

Model 210 Universal 2 STEP 3D || ZIP

MODEL 213-U2

0-600 RPM speed range. 4" (101.6 mm) port sizes available; suitable to 500 PSI (34.5 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	12.00	22.38	11.63	27.08	-	-	13.88	5.25	8.00	.66	17.80	6.88	21.24	10.38	2.375	8.62	17.25
MM	305	568	295	688	-	-	353	133	203	17	425	175	539	264	60.45	219	438

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 915 lb. (415.0 kg.).

Pump Curve 95-07156 - Model 213-U2 || PDF

Model 210 Universal 2 SOLIDWORKS 3D || ZIP

Model 210 Universal 2 STEP 3D || ZIP

MODEL 220-U2

0-600 RPM speed range. 4" (101.6 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	8.50	19.13	9.00	24.00	26.06	29.25	12.38	3.75	7.25	.53 slot	14.80	6.38	18.49	9.38	2.000	6.63	13.25
MM	216	486	229	610	662	743	314	95	184	13 slot	376	162	470	238	50.80	168	337

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 590 lb. (268.0 kg.).

Pump Curve 95-07081 - Model 220-U2 || PDF

Model 220 Universal 2 SOLIDWORKS 3D || ZIP

Model 220 Universal 2 STEP 3D || ZIP

MODEL 320-U2

0-600 RPM speed range. 6" (152.4 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	CP4	D	E	F	G	I	J	L	O	U	X	2X
IN	12.00	22.38	11.63	27.66	29.16	--	13.88	5.25	8.00	.66	17.80	6.88	21.63	10.38	2.375	8.00	16.00
MM	305	568	295	703	741	--	358	133	203	17	452	175	549	264	60.45	203	406

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 895 lb. (406.0 kg.).

Pump Curve 95-07132 - Model 320-U2 || PDF

Model 320 Universal 2 SOLIDWORKS 3D || ZIP

Model 320 Universal 2 STEP 3D || ZIP

MODEL 370-U2

0-600 RPM speed range. 6" (152.4 mm) port sizes available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40掳F (-40掳C) to 300掳F (149掳C).

听

听	A	AO	B	CP	CP1	D	E	F	G	I	J	L	O	U	X	2X
IN	12.00	22.38	11.63	29.16	30.66	13.88	5.25	8.00	.66	17.80	6.88	22.32	10.38	2.38	8.50	17.00
MM	305	568	295	741	779	353	133	203	17	452	175	567	264	60.5	216	432

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are 戮"-14 NPT on Models 006-U2 to 030-U2, 1"-11-陆 NPT on Models 042-U2 to 220-U2.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).

Approximate shipping weight 945 lb. (428.6 kg.)

Pump Curve 95-07245 - Model 370-U2 || PDF

Model 370 Universal 2 SOLIDWORKS 3D || ZIP

Model 370 Universal 2 STEP 3D || ZIP

MODEL	DISPLACEMENT PER REVOLUTION	NOMINAL CAPACITY TO	MAXIMUM PRESSURE
006-U2	0.0082 Gal. (0.031 Liter)	8 GPM (1.8 m鲁/hr.)	300 PSI (20.7 bar)
015-U2	0.0142 Gal. (0.054 Liter)	11 GPM (2.5 m鲁/hr.)	250 PSI (17.2 bar)
018-U2	0.029 Gal. (0.110 Liter)	20 GPM (4.5 m鲁/hr.)	200 PSI (13.8 bar)
030-U2	0.060 Gal. (0.227 Liter)	36 GPM (8.2 m鲁/hr.)	250 PSI (17.2 bar)
040-U2	0.076 Gal. (0.288 Liter)	45 GPM (10.2 m鲁/hr.)	150 PSI (10.3 bar)
045-U2	0.098 Gal. (0.371 Liter)	58 GPM (13.2 m鲁/hr.)	450 PSI (31.0 bar)
060-U2	0.153 Gal. (0.579 Liter)	90 GPM (20.4 m鲁/hr.)	300 PSI (20.7 bar)
130-U2	0.253 Gal. (0.958 Liter)	150 GPM (34.1 m鲁/hr.)	200 PSI (13.8 bar)
180-U2	0.380 Gal. (1.438 Liter)	230 GPM (52.2 m鲁/hr.)	450 PSI (31.0 bar)
210-U2	0.502 Gal. (1.900 Liter)	300 GPM (68.1 m鲁/hr.)	500 PSI (34.5 bar)
213-U2	0.502 Gal. (1.900 Liter)	300 GPM (68.1 m鲁/hr.)	500 PSI (34.5 bar)
220-U2	0.521 Gal. (1.972 Liter)	310 GPM (70.4 m鲁/hr.)	300 PSI (20.7 bar)
320-U2	0.752 Gal. (2.847 Liter)	450 GPM (102 m鲁/hr.)	300 PSI (20.7 bar)
370-U2	1.099 gal. (4.160 Liter)	660 GPM (150 m鲁/hr.)	200 PSI (13.8 bar)

Ports Standard:听Sanitary Clamp Type Is available in a variety of styles including S-Line, I-Line and Q-Line Options:

Bevel Seat Available
Optional European Types; DIN, SMS, RJT
Male NPT and 150 lb. flanges optional on Models 006 through 220 size
150 lb. flanges standard on Model 320
Contact factory for available rectangular flange inlets.

Rotors Standard:听Twin Wing suitable for most applications Options:

Single Wing - For reduced breakage on fluids with discrete particulates, such as diced tomato products

Rotor clearance Standard:听up to 180掳F (82掳C) Options:

Hot clearance rotors option for applications up to 300掳F (149掳C).
Other special clearances available.

O-Rings Standard:听听Buna-N Options:

PTFE/FFKM
Fluoroelastomer (FKM)
Fluoroelastomer (FKM) - Class 6
EPDM
EPDM - SF
EPDM - Class 6
Silicone
Perfluoroelastomer (FFKM)
FEP Encapsulates
Buna-N - Metal Detectable
FKM - Metal Detectable
EPDM - Metal Detectable

Cover & Gearcase Standard: cast iron powder coated gearcase, 17-4 stainless steel shafts, stainless steel bearing retainers Options:

Stainless steel gearcase
316L stainless steel shafts
Steel-It paint
Lower shaft position
Bearing Isolators
Pedestal shims for side mounted pumps. Left hand shaft position standard.
Right hand shaft position on side mounted gearcase

罢谤耻-贵颈迟庐 Close coupled 罢谤耻-贵颈迟庐 pump mounted on stainless steel base听with stainless steel adaptors standard. Features:

No shaft alignment necessary. No coupling guard required.
Special base design enhances cleanability.
Reduces overall length of complete unit by an average of 20-25%.
Average of 20-25 gear ratios available per horsepower.
Separate oil sump for gear reducer and timing gears.

Options:

304 SS polished plate base.
NEMA or IEC frames available. Right angle reducer also available for additional space savings.
1/2 through 60 horsepower drive options available.
Horizontal or vertical porting.

Click on the links below to download pump model performance curves for Universal 2 Series Positive Displacement pumps.

Download Instructions for Reading Positive Displacement Pump Curves || PDF

Universal 2 Series - Model 006 - Performance Curve - 95-07075 || PDF
Universal 2 Series - Model 015 - Performance Curve - 95-07076 || PDF
Universal 2 Series - Model 018 - Performance Curve - 95-07077 || PDF
Universal 2 Series - Model 030 - Performance Curve - 95-07078 || PDF
Universal 2 Series - Model 040 - Performance Curve - 95-07241 || PDF
Universal 2 Series - Model 045 - Performance Curve - 95-07106 || PDF
Universal 2 Series - Model 060 - Performance Curve - 95-07079 || PDF
Universal 2 Series - Model 130 - Performance Curve - 95-07080 || PDF
Universal 2 Series - Model 180 - Performance Curve - 95-07107 || PDF
Universal 2 Series - Model 210/213 - Performance Curve - 95-07156 || PDF
Universal 2 Series - Model 220 - Performance Curve - 95-07081 || PDF
Universal 2 Series - Model 320 - Performance Curve - 95-07132 || PDF
Universal 2 Series - Model 370 - Performance Curve - 95-07245 || PDF

免费吃瓜